GALVANIZED AND PAINTED GALVANIZED 38/151 TRAPEZOIDAL PLATE

It is trapezoidal plate made of galvanized or painted galvanized hot dip sheet.

It is manufactured in the form 38/151 mm section with 6 or 7 corrugations.

Net application width of 38/151 mm trapezoid with 6 corrugations: 755 mm

Net application width of 38/151 mm trapezoid with 7 corrugations: 906 mm

Hot Dip Galvanized 38/151 Trapezoidal Plate Technical Specifications:
Thickness 0,50 – 0,80 mm
Width 806 - 957 mm
Length 100 – 13000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)

Hot Dip Painted 38/151 Trapezoidal Plate Technical Specifications:
Thickness 0,50 – 0,80 mm
Width 806 - 957 mm
Length 100 – 13000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options Can be produced in all RAL codes.

Distributed Loads Hot Dip Painted 38/151 Trapezoidal Plates Can Sustain (kg/m2):
Sheet Thickness (mm) Load Values (kg/m2)
200 cm 250 cm 300 cm 325 cm
0,5 140 89 62 ---
0,6 175 111 70 ---
0,7 209 134 93 66
0,8 244 156 109 80

Load Amount kg/m2

Limit Values L/200
 
  • Profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Contact of profiles with water should be prevented in storing areas, and they should be stored in closed environment.
  • If storing will be outside a closed environment, profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Pallet based products should be stored in stock area so as to be on top of each other up to a maximum height of 3 m.
  • If the pallets are to be put on top of each other, pallets should be kept in stock so that pallet legs are in alignment.
  • During recycling of the profile, if it contains glass wool and/or plaster board residues, it should be treated as construction and destruction residue. Otherwise, it should be classified as metal waste.